How to Apply Your UV DTF Sticker

UV DTF transfers are premium, borderless decals that bond directly to your surface for a permanent, vibrant result. Follow these 4 easy steps and you'll have a flawless application every time.

Step-by-Step Breakdown

Step 1 — Prepare Your Surface

• Clean the surface thoroughly with isopropyl alcohol.
• Remove all dust, grease, and debris.
• Allow the surface to air dry completely before proceeding.

Step 2 — Peel Off the Backing

• Carefully peel the backing sheet away from the clear transfer film at a 180° angle.
• Do not let the sticky surface touch itself.
• Ensure the entire image stays on the clear transfer film.

Step 3 — Place & Press

• Align the decal precisely before making full contact.
• Squeegee firmly from the center outward to eliminate air bubbles.
• Use overlapping strokes to cover the entire design.

Step 4 — Remove the Transfer Film

• Peel the top film slowly at a very low angle, folding it back as you go.
• Inspect edges — re-press any areas that lift.
• Let the applied sticker cure for 24 hours for best results.

Tips for Best Results

• Works on: Tumblers, water bottles, glass, metal, smooth plastic, and more.
• Water resistant — Avoid the dishwasher or long soaks in hot water.
• UV-resistant — won't fade in the sun.
• Scratch-proof — built for real life.

Have questions? Contact us — we're happy to help!